If you want to increase the speed of your Kewlus Cobra Bag, one of the best ways to do it is by customising the Click Bar for the top section - the one that connects the spring to the ball adapter.
The standard Click Bar is 15 inches in length. There are two ways to customise it:
- Cut 3 inches off one side of the Click Bar to shorten it to 12 inches. You will also need to reposition the push buttons on that side by drilling new 8mm holes 3 inches from the new end.
- If you want to preserve the original Click Bar, you can make one using a 3/4 inch PVC pipe (outer diameter 1.05 inches), which you can buy for a few dollars at a hardware store. Most standard 3/4 inch PVC pipes have the same outer diameter with some exceptions, so make sure to check the outer diameter by taking the ball adapter with you.
The video below shows you step-by-step how to do this: