How To Make Custom Cobra Bag Targets for Your Kewlus

Did you know that you can make your own cobra bag targets for your Kewlus? I made the Kewlus compatible with the 3/4 inch PVC pipes just so you could do that! This opens up endless variety of options and training possibilities, such as lighter or heavier targets, single or double targets, smaller or larger versions, and even different shapes!

Custom DIY cobra bag targets are super fast and low cost - from around just $10 for the materials, and they NEVER need inflating!

Watch the videos below for the making of two variations of targets for your Kewlus cobra bag. They are super cheap to make, super fast and never need to be inflated.

Materials:

• Standard 3/4 inch PVC Schedule 40 pipe (designated as the DN20 or 20mm PVC pipe in Australia) - actual outer diameter is 1.05 inches. This pipe is exactly the same size as the Kewlus Click Bar or Red Bar, and fits perfectly into any of the Kewlus springs. You can get it from Bunnings in Australia and here on Amazon in the USA.
• 2 Pool Noodles - best size is a 3 inch outer diameter noodle with a 1 inch hole through the centre. Sold in most department stores like Target and Kmart.
• Wide, stretchy duct tape (also known as PVC tape or electrical tape).
• Optional: Dual Push Buttons (see second video)

Tools:

• To install the optional push buttons you'll need a drill with a 5/16 inch (8mm) drill bit (see second video)

Super Fast Version

In the video below I show how to make a super fast custom target...

Dual Strike Zone Version

The video below shows the making of the second version of the dual strike-zone target...

I'd love to know your thoughts and ideas on this target and if you plan on making one - let me know in the comments of the video!

Head & Skinny Body Version

Here's the first version of the head and a skinny body. This one includes the installation of the push buttons for easy mounting onto the Kewlus KS3 Spring...