DIY Dual Strike-Zone (Head & Body) Target for Your Cobra Bag

Watch the videos below for the making of two variations of the dual strike-zone (head and body) target for your Kewlus cobra bag. They are super cheap to make, super fast and never need to be inflated.

Parts:

• Standard 3/4 inch PVC Schedule 40 pipe (designated as the DN20 or 20mm PVC pipe in Australia) - actual outer diameter is 1.05 inches. This pipe is exactly the same size as the Kewlus Click Bar or Red Bar, and fits perfectly into any of the Kewlus springs. You can get it from Bunnings in Australia and here on Amazon in the USA.
• 2 Pool Noodles - best size is a 3 inch outer diameter noodle with a 1 inch hole through the centre. Sold in most department stores like Target and Kmart.
• Wide, stretchy duct tape (also known as PVC tape or electrical tape).
• Optional: Dual Push Buttons (see second video)

Tools:

• To install the optional push buttons you'll need a drill with a 5/16 inch (8mm) drill bit (see second video)

Instructions:

The video below shows the making of the second version of the dual strike-zone target...

I'd love to know your thoughts and ideas on this target and if you plan on making one - let me know in the comments of the video!

Here's the first version of the head and a skinny body. This one includes the installation of the push buttons for easy mounting onto the Kewlus KS3 Spring...