The Kewlus Olympic Weight Plate Sleeve will allow you to use one or more Olympic weight plates to greatly enhance the rigidity of your Kewlus Cobra Bag or Spinning Bar.
Design Features
I designed the Sleeve with a standard 50 mm (roughly 2 inches) outer diameter to match the hole diameter of the standard Olympic weight plate. The bottom of the sleeve will sit wedged between the sandbags, with the weight plates resting on top. The sandbags act as a buffer between the baseboard (or Paddles or Suction Cups) and the weight plates, absorbing any shock and enhancing rigidity.
If used with the Suction Cups, the Sleeve and one or two weight plates will make the base much more rigid and the suction pads less likely to dislodge.
When?
I'm currently testing the prototypes of these and will be posting a video or two on my Youtube channel soon. Initial numbers will be limited, so if you want to get your hands on one, make sure to subscribe to my YouTube channel: youtube.com/@Kewlus - this is where I will be making the release announcements.
How Much?
As always I aim to keep costs down and pass on the savings to you guys. It will be affordable and similarly priced as many of the other components.
Other Questions?
If you have any questions, post them in the comments below.
