Base Connector

The Kewlus Base Connector is made from a tough, fibre-composite material used in high performance car engine components. Designed to be used as a base mount for modular free-standing equipment like the Kewlus Cobra Bag in conjunction with the Click Mast (sold separately or as part of a kit).

Please Note: the Mast may be quite tight when inserting into the Base Connector. This is a good thing, but may present a challenge when inserting into the Connector. If that's the case, first mount the Base Connector onto the baseboard (or Paddles), then use a screwdriver through one of the top holes in the Mast to help you push it into the Connector Watch this video on how this can be done:

Important: The Base Connector includes a stainless steel hose clamp. Once you insert the Click Mast into the Connector, the steel clamp must be clamped tightly around the collar of the Connector - see picture. Do not tighten the clamp without the mast.

Super Important: If you're using the Paddles with your Base Connector, please ensure that the silver locking screw and nut that comes with the Paddles is nice and tight at the centre of the Paddles. See this video for details: https://youtu.be/2Hy0FtnaLfo

The Base Connector can be used in many different ways to set up a base for your cobra bag or spinning bar. Detailed & optimised base setup instructions are on this page:

https://kewlus.com/blogs/support/how-to-ks3-cobra-bag

If you need to pre-drill pilot holes to attach the base, use the base itself or use this Base Connector PDF template file as a template for marking the holes. Important note: make sure to print at 100% scale or the holes will not line up.